l Top adjustable design
l Built-in 45° clear apertures
l Monolithic construction
l 100TPI lockable adjustment screws
l Top adjustable design
l Built-in 45° clear apertures
l Monolithic construction
l 100TPI lockable adjustment screws
The SFM25 is a Top adjustable designed monolithic flexure mount. Clear aperture cut-outs have been added to maximize beam clearance for beamsplitter applications. These cutouts are set at 45° and are large enough to accommodate a maximum beam size of 10.3mm at angle variations of ±2.5°. This variation has the tip/tilt adjustments moved to create a top-adjusted flexure. The pitch and yaw adjustments are made using our 100TPI rolled thread adjustment screws for low stiction fine adjustments and are swaged at the end to prevent over-travel of the mount. The top adjust block incorporates an anti-creep feature that allows the user to adjust a pre-load on each adjustment screw.
Order information:
Model | SFM25 |
Pitch | 5° |
Yaw | 5° |
Minimum controllable motion | 4.5 arc sec. |
Copyright ©Wuxi Shine Opto-Electronics Technologies Co., Ltd
技术支持:江苏百拓信息技术有限公司